“Don’t judge a book by it’s cover,” my dad use to say. The same goes when buying a custom Log or Timber Frame Home. It’s important to do a full log home inspection, inside and out so you can assess and address any potential problem areas. The exterior logs may not look perfect but that doesn’t mean you should turn your back on a once beautiful home. Some log homes just need a little tender love and care to bring them back to their original beauty. Log homes have some characteristics that are very different from conventional homes, so here are a few things to look for when shopping for a log house.
Log Home Settling and Shrinking
First off, full scribe log homes are the most prone to settling but all log homes have a bit of settling and shrinking. Settling typically occurs over the first few years as the logs dry, lose their moisture and shrink. A properly built log home will take this shrinkage into consideration when building to ensure you don’t have major cracks or structural damage. Here are some signs to look for that may indicate the home didn’t settle properly.
- Logs inside and outside the home: Logs shrink in diameter due to loss of their natural bound
water over time. As they dry out, they may naturally crack. Some cracks are not a concern but larger cracks more that ¼” in width should be repaired or have some caulking applied.
- Windows and doors: Log homes should be built with settling space above the doors and windows in order to prevent the weight of the walls from bearing down on them. If you notice bowing or the doors sticking when opening this may be the result of not enough space left for settling.
- Staircases: If walls lose height, anything connected to them does as well, and this includes the stairs. Inspect stairs to ensure they are level and still properly connected to the home.
- Electrical and pipes: Vertically installed plumbing pipes and rigid conduit may accumulate stress in two or more storied homes if not properly installed for shrinkage. It’s important to work with an electrician and plumber that has expertise with log homes as the procedures are slightly different compared to traditional log homes.
Log Home Exterior
It’s not uncommon for log homes to look a bit dirty and have some flaking on their finish, but if you notice black spots on the exterior surface, this could be a sign of mold or mildew. If possible, use a hammer to tap the logs. If you hear a hollow sound, this could be a good indication of rotting within the logs.
Log Finish Stains and Coatings
Logs can easily become deteriorated by weather. Different stains and coatings are designed to protect log surfaces from UV damage, while some also prevent destruction from wood-loving insects and pests. To test the effectiveness of your log home’s finish, spray the logs with water – if the water beads on the surface, all is well, but if it is absorbed by the wood, then the finish is no longer functioning properly.
Insect Infestation
Fortunately, most wood-destroying insects tend to leave behind little clues of infestation. The entry and exit holes can tell you what species of insects you are dealing with, while sometimes you may actually see the insects themselves. Both termites and carpenter ants shed their wings and burrow into the wood when they reach a new location, leaving behind tell-tale piles of wings and small bits of sawdust-like particles around holes. Be sure to research what damage-causing insect is in your area, as well as any tips on how to prevent infestations.
Proper Drainage
We talk often of the perimeter of your home having proper drainage, and it is crucial that no logs are touching soil or grass. As beautiful as your landscaping can be, it can cause serious moisture issues and bug infestations, when it resides too close to the exterior logs of your home.
Deck Flashing
When installed correctly, decks look amazing, so make sure the proper flashing has been installed and that there are no huge gaps between the exterior wall and the deck. When water drips off the roof and onto the deck it tends to splash back onto the house, so keep an eye out for water damage.
Gutters
Though not all that aesthetically-pleasing, gutters prevent water from running down the exterior walls and causing water damage to your log home. The downspouts also direct water away from the foundation, preventing water from going directly into the basement.
Overhangs and Exposed Logs
Overhangs keep snow and rain from saturating the foundation and off the exterior walls. They should be no less than 24 inches and at least 36 inches on a two story home. Logs that have been exposed to natural elements can turn grey and begin to rot over time creating huge structural damage to the home.
Missing or Messy Chinking or Caulking
Look for any spots where the chinking or caulk is missing or appears messy and unappealing. This could be an indication that other areas of the home may not be up to par care. The repairs should not be done with a “good enough” attitude and shouldn’t stand out like a sore thumb.
If you do notice there are some areas of the home that need some attention and repair, you can hire an experienced log home builder or trades person to help you in most cases. This article will provide you with a good overview of what you should be looking for and we recommended having someone who is familiar with log homes to accompany you, even a log home trained inspector, as log homes have different behaviours compared to traditional homes.
If you have purchased a log home and are looking to have some repairs or renovations done feel free to contact us info@artisanlog.com.
Related Articles
- Protecting your log home from dry rot
- Log structures and cracked logs
- 5 DIY builder mistakes and how to avoid them
- Log Homes 101: Everything you need to know about log homes
from Artisan Custom Log Homes http://ift.tt/1WX6Upf
